Most Popular Questions

Do not point the thermal device (both on and off) towards high-intensity IR sources such as the sun, a laser, electric arcs, and incandescent filaments. It can cause thermal sensor damage.
And, of course, Do not subject the device to mechanical impacts during transportation and operation.
Avoid contamination of a lens with aggressive chemicals during weapon cleaning.
The Nano 2 clip-on withstands any hunting caliber recoil including .375 Holland&Holland. Thanks to its small weight, it is exposed to low recoil pulse which is not that high as heavy clip-ons have.
The clip-on is compatible to any scopes by means of adaptors to lenses of various diameters.
Optimum scope magnification oriented to this clip-on varies from 1 to 8. You get the sharpest image around 4-folds zoom.
The effective range for big animal hunt is up to 500 meters and for small animals is up to 250 meters.
A quick-detachable mount is used to install it to tactical weapons which are usually equipped with the Weaver/Picatinny rails. This mount has lever tightening adjustment. Set it against one slot, press pushing forward, and lock the lever. In this case the distance between the scope and the clip-on doesn’t really matter, as perfect coincidence of their axes is not required.
A standard driven hunt scope Swarovski 1-6×24. You’ll use such a threaded ring-type adaptor to attach the clip-on. Install the clip-on and unscrew a nut. This version allows maximum low mounting of the clip-on and iron sights of the rifle will not hinder such installation.
The IWT Operator application is required to transmit Nano2’s videos, as well as firmware and navigation maps update. Its free download is available in Play Market for Android and in AppStore for iOS.
Wi-Fi should be turned on in order to transmit videos to a tablet or a smartphone. Press and hold a central button to enter the menu, then go to the Wireless Networks section – Wi-Fi, activate Stream Video and “Create Network” items.
Enter the tablet’s Settings – Connections, turn on Wi-Fi. Well, our clip-on is founded, let’s connect it. Open the IWT Operator. Searching is started; it will find our clip-on; enable stream video. Now you can see the clip-on’s picture on the screen.
There are 3 ways of video recording. The first way is by button. Press and hold a left button for two seconds to activate the recording. A red token will appear with a video number. The left button stops the video recording respectively.
The second way is automatic video recording by shot. To enable it, enter the Menu- Multimedia-Video Recording Settings – Recording type – By shot. Here you set up pre- and post-event intervals. These intervals will be saved in the device memory.
The third way is to activate recording via a gadget (tablet or phone) and save video in its memory. Press the button on the screen of the opened application to start recording and press it again to stop. You can find this video in a multimedia section, send it to YouTube by various ways, via e-mail, WhatsApp, etc., as well as playback it.
To playback videos, you enter the multimedia section – video archive. You can find here data saved by shot and by button; videos are indicated by numbers. You can playback any of them and send if necessary.
If you shoot with the clip-on, you use a scope reticle for aiming. It means that a video doesn’t have it. To get the video aiming point displayed, you should enable the virtual reticle and superimpose it with our scope reticle. For this, enter Menu-Clip-on. Activate the virtual reticle, enter the Adjustment item, and superimpose a diamond mark with the center of our reticle. So on, you will view our exact aiming point for video recording.
The IWT’s thermal clip-ons comprise a unique ballistic correction system. Since you use the scope reticle for aiming and cannot move it relative to a thermal image, the image moving system has been implemented. It means that ballistic data of the selected ammo should be entered first, and then, after the range entering, the image will move in vertical direction to a distance which a bullet choses at this range.
As optical arrangements of different scopes vary, sometimes the night zero correction is required. For this, press and hold the central button to enter the service menu. The standard menu appears first, but you should keep holding the button. Then the service menu is introduced. Its upper parameter is the night zero. Here you can find X and Y axes default settings. If the impact point needs any adjustments, you move the image in vertical and horizontal directions. The point of impact should coincide during shooting both with the scope and the clip-on. Next, you exit the service menu.

Ask your question

By clicking "Ask a Question", you agree to the processing of personal data in accordance with the User agreement.